Description:
Steering system illustration shown for reference only - click here to shop these parts by interactive diagram
Looking for Steering parts for your vintage Willys or Jeep? Shop steering parts by Category or by Diagram
| Hard Steering: | Possible Solution: |
|---|---|
| Lack of lubrication | Lubricate all connections |
| Tie rod ends worn | Replace |
| Connecting rod ball joints tight | Adjust |
| Cross shaft improperly adjusted | Adjust |
| Steering gear parts worn | Replace |
| Steering Loose: | Possible Solution: |
| Tie rod ends worn | Replace |
| Connecting rod ball sockets worn | Replace |
| Steering gear parts worn | Replace |
| Steering gear improperly adjusted | Adjust |
| Road Shock: | Steering connecting rod too tight; axle spring clip loose; wheel bearings loose, poor shock absorber control |
| Turning Radius: Short one side | Center bolt in spring sheered off, axle shifted, steering arm bent, steering arm not properly located on steering gear |
* Learn more about the steering system from the Master Parts List Manual for 50-52 M38
