Clutch illustration shown for reference only - click here to shop for these parts by interactive diagram
Looking for Clutch parts for your vintage Willys or Jeep? Shop parts by Category or by Diagram
Clutch Pedal Adjustment
The free pedal clearance is adjusted by lengthening or shortening the clutch control lever cable. Correct clearance is 1 1/2" (38,1 mm.). This clearance is essential to disengage the clutch release bearing and prevent unnecessary wear and possible clutch slippage. When adjusted as outlined above there is a safe clearance of approximately 1/16" (1,58 mm.) between the clutch release bearings and the clutch fingers. Correct clearance is 1" [25,4 mm.]. To make this adjustment, loosen lock nut, and unscrew cable to proper adjustment then tighten locknut. Free pedal travel is measured at the clutch pedal pad. (J-3, p156)
* Learn more about the clutch from the Service Manual for Universal Jeep Vehicles page 156
RELATED VIDEOS:
