Description:
Steering system illustration shown for reference only - click here to shop for these parts by interactive diagram
Looking for Steering parts for your vintage Willys or Jeep? Shop steering parts by Category or by Diagram.
| Steering Gear: | |
|---|---|
| Make | Ross |
| Type | Cam and Lever |
| Model | TL-12 |
| Ratio (Variable) | 19-16.7-19 to 1 |
| Wheel | 17" dia. [43,18 cm.] |
| Bearings: | |
| Cam-Upper | Ball |
| Cam-Lower | Ball |
| Lever Shaft | Bushing |
| Steering Column Upper | Ball |
| Lever Shaft: | |
| Clearance to Bushing | .0005" to .0025" [0,0127 a 0,0635 mm.] |
| End Play | .000" |
| Lash at Cam (Straight ahead) | Slight Drag |
| Wheel Turns | |
| Model: | L6-226 4x4 | L6-226 4x2 | F4-134 4x4 | F4-134 4x2 |
|---|---|---|---|---|
| Steering Geometry: | ||||
| King Pin Inclination | 7 1/2° | 7 1/2° | 7 1/2° | 7 1/2° |
| Toe-in | 3/64" to 3/32" [1,183 a 2,381 mm.] | 3/64" to 3/32" [1,183 a 2,381 mm.] | 3/64" to 3/32" [1,183 a 2,381 mm.] | 3/64" to 3/32" [1,183 a 2,381 mm.] |
| Camber | 1 1/2° | 1° | 1 1/2° | 1° |
| Caster | 3° | 3° | 3° | 3° |
| Turning Radius | 24' [7,3 m.] | 22' [6,7 m.] | 25' [7,6 m.] | 22' [6,7 m.] |
| Turning Angle | 29° | 29° | 29° | 29° |
| Outside Wheel Angle with Inside Wheel at 20° | 20° | 21° 45' | 20° | 21° 45' |
* Excerpt from the Service Manual for Jeep Utility Vehicles page 230
RELATED VIDEOS:
