Description:
Steering system illustration shown for reference only - click here to shop for these parts by interactive diagram
Looking for Steering parts for your vintage Willys or Jeep? Shop steering parts by Category or by Diagram.
| Steering Gear Specs: | |
|---|---|
| Make | Ross |
| Type | Cam and lever |
| Model | T-12 |
| Ratio | 14-12-14 to 1 |
| Ratio | 14-12-14 to 1 |
| Bearings: | |
| Cam-Upper | Ball |
| Cam-Lower | Ball |
| Lever Shaft | Bushing |
| Steering Column-Upper | Ball |
| Lever Shaft: | |
| Clearance to Bushing | .0005" to .0025" |
| End Play | .000" |
| Lash at Cam (Straight Ahead) | Slight Drag |
| Wheel Diameter | 17 1/4" |
| Wheel Turns | 2.58 |
| Steering Geometry Specs: | |
| King Pin Inclination | 7 1/2" |
| Toe-In | 3/64" to 3/32" |
| Camber (All CJ Models) | 1 1/2" |
| Caster | 3° |
| Turning Angle: | |
| CJ Models | 23° or 27 1/2° |
| Turning Radius with 23° Angle: | |
| CJ-2A | 17' |
| Outside Wheel Angle with Inside Wheel at 20°: | |
| Jeep' Universal | 20° |
* Learn more about steering from the Service Manual for Universal Jeep Vehicles page 222
